# Third-party devices

> Adding your own router, switch or mesh system, and the constraints that come with it.

Source: https://joinnasnet.com/en/guides/starlink/third-party-devices/
Last updated: 2026-08-18

---

## Overview

You can put your own equipment on a Starlink connection. Starlink does not
guarantee performance or compatibility with hardware it did not make, and some
app features stop behaving as expected once a third-party router is in charge.

## Third-party router

Connect the third-party router behind the Starlink router, then enable **bypass
mode** in the app. That disables the Starlink router's WiFi and hands
everything over.

Two things to plan for before you start:

- **Exiting bypass mode requires a factory reset.** There is no toggle back.
- On a **Starlink Mini**, using a standard RJ45 cable costs you the IP67
  rating. Use the Mini Starlink Cable if the connection is exposed.

See [Bypass mode](/en/guides/starlink/app/) for the per-router steps.

## Network switch

You can connect a switch. Where it goes depends on the kit.

**Standard 4, Standard 4 X.** Use one of the two LAN ports on the back of the
Router 3, under the rubber cover, or a LAN port on your own router.

**Do not put a switch between the power supply and the router**, and do not
connect a switch to the white port on the power supply.

**Do not enable bypass mode for a switch.** Bypass mode exists for third-party
*routers* and hands out only one IP address, which is not what a switch needs.

## Mesh

Starlink mesh nodes are sold in the Starlink shop, and a Router 3 or Router
Mini can act as a node. See [Routers](/en/guides/starlink/routers/) and
[Mesh troubleshooting](/en/guides/starlink/mesh/).

For a third-party mesh system, treat it as a third-party router: put it behind
the Starlink router and enable bypass mode.

## Client devices

Most devices connect without trouble. Keep firmware, operating systems and
browsers current, and check with the manufacturer if something specific
refuses to work.

## Related

- [Bypass mode](/en/guides/starlink/app/)
- [Networking](/en/guides/starlink/router-config/networking/)
- [Slow speeds on a third-party router](/en/guides/starlink/slow-speeds/)